The Copycounter 2 uses infra-red technology to give you:

Accurate count of your product at a less expensive price.
A count rate better than 360,000 copies per hour.
Easy, worry-free maintenance.
Infrared non-contact sensing technology.
Accurately count of printed product on conveyor or stacker.
Easily connected to PLC, Data Collector or Totalizer systems.

CC2 advantages:

Great for stacker applications in commercial and newspaper environments
No contact = no jams = no wear.
Counts the leading edge exactly where it is, no need to "learn" and block count signal as with microprocessor.
Versatile: Perfect synchronization counting Ink jet labeling - Disk wind up units - High speed batching or gripping systems.
More versatile interface options to OEM lines.

Count rate: To 700,000 copies per hour.
Product Range: 8 page overlapped (shingle) sheet upwards.
Operating distance: 85mm +/- 20mm.
Minimum overlap: 5mm.
Power supply: 18-39 VDC, 1 volt ripple max., 210mA.
Fusing: Internal fuse 500mA radial.
Output signal: Optoisolated NPN transistor output 5 to 50VDC. 100mA when ON.
Ouput signal width: 5 mSec, 12 mSec and 20 mSec.
Weight: 1.5 Kg.
Dimensions: length 205mm, height 74mm, width 80mm.

Manual

Repairs

How it works

Kit:

The Copycounter 2 comes wrapped and boxed with all the parts you need to mount and install.

3m cable with connector.

Mounting block to clamp to a 25mm (1 inch) bar over the shingle stream.

Manual detailing installation, wiring, settings and maintenance information.

Some CC2 Stacker Installations:

Baldwin, Civiemme, Gammerler, GPS 3000 ,Hall Monitor, IDAB, Muller Martini, Prim Hall, Quipp, Rima, SMC, Sta-Hi, Stobb, TMSI Compass

Sensor System Consultants Ltd (UK) and Plumtree Company (USA) have joined forces to recover a selected stock of Copycounter 2 (CC2) units.

We are passing the savings on to you the customer to give you one of the best shingle counters for a fraction of the price of new.

These are units that we accepted in trade from selected customers and completely overhauled electronically and re-painted to look and work as well as the day they were first made. Therefore, a full 3 year warranty is in place.

Each Copycounter 2 comes wrapped in its own carton with a 3 metre (9 ft) cable, a mounting block and fixing screws and a comprehensive manual.

The Copycounter 2 (CC2) was originally designed and manufactured by Quantity and Time Management Systems Ltd (QTMS) in 1986 and rapidly became the shingled-stream counter of choice for both newspaper and commercial printers. There are hundreds of CC 2 sensors still working in the factories around the world.

Check it out: Contact us or Plumtree Company and ask the price then order your CC2 today while we still have stock.