Some CC3 Stacker Installations:

Baldwin

Civiemme

Gammerler

GPS 3000

Hall Monitor

IDAB

Muller Martini

Prim Hall

Quipp

Rima

SMC

Sta-Hi

Stobb

TMSI Compass

The Copycounter 3 uses infra-red technology to give you:

• Accurate count of your product at a less expensive price.
• A count rate better than 360,000 copies per hour,
• Smaller size for easy  installation.
• Worry-free maintenance.
• The latest in non-contact sensing technology.
• Accurately count of printed product on conveyor or stacker.
• Easily connected to PLC, Data Collector or Totalizer systems.

CC3 advantages:

• Smaller, lighter and more compact. Great for stacker applications.
• No contact = no jams = no wear.
• Counts the leading edge exactly where it is, no need to "learn" and block count signal as with microprocessor.
• Versatile: Perfect synchronization counting Ink jet labeling - Disk wind up units - High speed batching or gripping systems.
• More versatile interface options to OEM lines.
• New re-settable fuses.

Count rate:  To 700,000 copies per hour.
Product Range:  Single folded overlapped sheet upwards.
Operating distance:  85mm +/- 20mm.
Minimum overlap:  5mm.
Power supply:  18-39 VDC, 1 volt ripple max., 210mA.
Fusing:  Automatically reset on power OFF. Fusing on both +V and 0V power input  and signal output +S.
Output signal:  Optoisolated NPN transistor output, 50VDC. 100mA when ON.
Ouput signal width:  5 m/sec, 12 m/sec and variable from 20 to 100 m/sec.
Weight:  600 grams.
Dimensions:  length 190mm, height 74mm, width 43mm.