GPIF1 Interface:

General Purpose Interface GPIF1

Typical application of the GPIF1 is shown in the drawing to the left. The GPIF1 ensures that the pulse length of the signal from the proximity sensor is acceptable to the data collection device.

Netcom 2 serial/TCPIP converter

Netcom 2

The Netcom 2 unit is a serial to TCP/IP interface designed specifically for industrial applications.

This clever device allows a serial communicating device to be attached to any local network.

Stetting the baud rates, stop bits, parity etc is very simple and is done “on-line”.

You can assign an IP address or let the DHCP auto-router find it.

This unit is for professional and amateur IT personnel alike and GNG Systems Ltd will be happy to assist you with implementaion.

It is available in the following forms:

Voltage: 5, 12 and 24 Volt

RS232C, RS232 TTL (serial from TTL source) or RS 422.

Dont’ throw away your RS232 serial devices such as barcode scanners, printers or weighscales.  Put them on your local network and work with them on their own IP address.

GPIF1 General Purpose Interface Netcom 2 Serial to TCP/IP converter