Please note: the sensor pair needs to be connected to the RDT1 unit below to function.
Milljoin Sensor
The MDRL milljoin sensor pair is controlled by the RDT unit below:
- Detects milljoins over a wide range of translucent materials
- Detects a 20mm join at a web speed of 20 metres/second
- Detects and reports a web break in 100 micro seconds
- On paper base weight:s 25 to 400 gsm without adjustment
- Not susceptible to ambient light flicker
The RDT1 - Reelstand Data Terminal unit:
- Controller for the milljoin MDRL sensor pair
- Controller for the Metrecount MC1 unit.
- Controller for splice reporting and web break detection.
- Outputs can be connected to the inputs of a PLC/Data Collector/Totaliser
- Serial data options send collected data by RS232C or TCP/IP network.
Reelstand Data Terminal RDT1
Of the MDRL pair:
MDR is the milljoin sensor receiver
MDL is the milljoin sensor lamp